CHANGE JBOD MODE ON LSI CONTROLLER : Ace Computers

CHANGE JBOD MODE ON LSI CONTROLLER Print

Modified on: Tue, 26 Jul, 2022 at 1:29 PM

PROBLEM:

DRIVES ARE NOT SHOWING AS JBOD ONLY AS ONLINE GOOD IN MY WINDOWS SYSTEM

SOLUTION:

USE STORCLI TO CHANGE THE DEFAULT CONTROLLER MODE

IN COMMAND PROMPT (ADMINISTRATOR) FROM C:\PROGRAM FILES(X86)\MEGARAID STORAGE MANAGER DO:

storcli (or storcli64) /c0 set jbod=on

FROM THIS POINT ON, ANY NEW DRIVE CONNECTED TO THE CONTROLLER WILL BE INSTANTLY AVAILABLE TO THE OS

IF STORCLI IS NOT INSTALLED, DOWNLOAD FROM:

Did you find it helpful? Yes No

Help Desk Software by Freshdesk